Dr. M. Dirhamsyah

Dr. Dirhamsyah Nama

TTL

Pendidikan

Keahlian

:

:

:

:

Dr. Ir. Muhammad Dirhamsyah, MT

Medan, 2 Oktober 1962

Ph.D. Departemen Mekanik dan Material,
National University, Malaysia
Production and System Technology,
Condition Monitoring System

Kontak
  • Kantor:
  • Tgk Syech Abdul Rauf No. 7, 23111, Nanggroe Aceh Darussalam
    Tel. +62 651 7428420 or Tel./Fax. +62 651 53288

  • Rumah:
  • Jl H. M. Daud Beureueh, No 33, Nanggroe Aceh Darussalam.
    Tel. +62 651 7410064
    Email: mdirham@tdmrc.org

Jabatan Saat ini
  • Ketua Pusat Riset Tsunami dan Mitigasi Bencana, Universitas Syiah Kuala

Publikasi

  • M.J. Mohd Nor & Dirhamsyah, M. 2002. Matlab, Engineering Application (Aplikasi Dalam Kejuruteraan), Mc. Graw-Hill Education Asia Pacific Region.
  • Dannis Huang, Mathew Francis, J.P Singh, Dirhamsyah, Junun, Said Aziz, Robin Willison, Byung Ho Choi, Seth Stein, Jose Borrero, Hong Kie Thio, Carlo Ratti, Dennes Bergado, Coastal Hazard Mitigation Guidebook for the Region and Communities of the Province of Nanggroe Aceh Darussalam and the Islands of Nias, Province of North Sumatera, (prepared for BRR-Not published)
  • Participant for Disaster Preparation in SATKORLAK Meeting at Governor Hall Meeting Room in Banda Aceh, 23 January 2007
  • Participant for National Action Plan for Disaster Risk Reduction for 2006-2009, Jakarta, January 2007.
  • Secretary of panel discussion for Disaster Law in Social Ministery Department, Jakarta 17-18 January 2007.
  • Resource Person “ Workshop on Promotion of Disaster prepadeness in school education”, Banda Aceh, 26-27 Januari 2007, Asian Disaster Recution Center and Jambo Minda Foundation, Darussalam
  • Participant at Coordination Meeting for Indonesia Tsunami Early Warning System (ITEWS), Minister Research and Technology, 15 Januari 2007, Jakarta
  • Participant and presenter in Coordination Meeting Engineering Faculty, Syiah Kuala University, Darussalam 13 January 2007.
  • Participant at Coordination Meeting for Indonesia Tsunami Early Warning System (ITEWS), Minister Research and Technology, 21 December 2006, Jakarta
  • Hamzah, Syahril, Wayan, Hendayani, Agussalim, M. Dirhamsyah, Munirwansyah, Syamsul Rizal (2006), Microzonation and Hazard Mapping of Meuraxa District, International Workshop on Learning from the recovery and reconstruction of Banda Aceh and other Tsunami-Stricken regions, December 6-7, 2006, BRR-Unsyiah-Kobe University.
  • M. Dirhamsyah, 2006, Legacy of the Tsunami and Disaster Mitigation Reserearch Center, International Workshop on Learning from the recovery and reconstruction of Banda Aceh and other Tsunami-Stricken regions, December 6-7, 2006, BRR-Unsyiah-Kobe University.
  • Participant in Mechanical Engineering National Seminar (Seminar Nasional Tahunan Teknik Mesin-SNTTM-5), Mechanical Engineering Cooperation Body – Indonesia, cooperation with BKS-TM Indonesia and Mechanical Engineering University of Indonesia November 2006. Participant in Seminar for revitalitation of Atseri Oil at Hotel Antares, Jl. Sisingamaharaja 94, Medan, 23 November 2006
  • Muhammad Dirhamsyah and Marwan, 2006, Potential Development and Use for Biodiesel in Nanggroe Aceh Province, Seminar of The Industrial and machienary Abilitiy for Jarak Process as a alternative fuel and Agriculture Equipment, Darussalam, 9 November 2006
  • Agussabti, M. Dirhamsyah, 2006, “Assessment to undertake livelihoods programs post-tsunami” International Joint Workshop for Mitigation and Rehabilitation of Tsunami Disaster in the Banda Aceh Region, JSPS, Nagoya University and Syiah Kuala University, Indonesia, Banda Aceh 28 November 2006.
  • Participant at Tsunami Early Warning System (TEWS) for government and profesionals, Banda Aceh, Sea Defence Consultants, 20 September 2006
  • M. Dirhamsyah, 2006, Mechanical Engineering and Perspective beyond the growth of Industtrialization and Trade in Aceh, Coordination Meeting for Industrial and Trade for all District in Nangroe Aceh Province, Takengon, 28-30 Agustus 2006
  • Dirhamsyah, M. and Agussalim. 2006. The Strategic Program in Respon to Tsunami Disaster, Kobe University. Kobe
  • Muslimsyah, Dirhamsyah, M. 2005. The Utilisation of Noise Signal for Environmental Condition Monitoring, Teknorona, ISSN 1410-2560, Engineering Faculty, Syiah Kuala University.
  • M.J. Mohd Nor, Mohd. Zaki N. & Dirhamsyah, M. 2003. Combination of Time-Domain Correlation Method for Mechanical Signal From Multiple Machine Condition, Proceeding Research and Development, Mechanical Department Universiti Kebangsaan Malaysia
  • Dirhamsyah, M. 2003. Plastic Moulding Technology, Public Service for the Younger Communities, Syiah Kuala University.
  • Dirhamsyah, M., Mohd. Jailani, M.N., Nik Mohamed, N.A., Jamaludin, N. 2003. Acoustic Energy and Tribo-Mechanics of Drilling Operation using Numerical Control Machine, Energi and Management Seminar, Syiah Kuala University.
  • Noridah Ibrahim, Dirhamsyah, M. M. Y. M. Jamal. 2003. Process Planning Using Conceptual Design, 6th Production System Seminar, Bandung Institute of Technology and Gajah Mada University.
  • Dirhamsyah, M. 2003. Evaluation of Drilling Performance on Numerical Control Machine. Technical Assistance: Predictive Maintenance, Vibration/Noise Signal Analysis & Noise/Vibration Control, Research Center for Noise Control and Knowledge-Based in Engineering, North Sumatera University.
  • M. Y. M. Jamal, S. V. Wong, Dirhamsyah, M. 2003. Feature-knowledge-Based Cost Estimation System for Lathe Machining Process, Flexible Automation and Intelligent Manufacturing Seminar, Florida.
  • Noridah Ibrahim, Dirhamsyah, M. 2003. Keynote speaker: College and University Education Facing the Acceleration Change of Technology and Manufacture Industry, Computation Mechanics and Numerical Analysis Seminar, Faculty of Engineering, Syiah Kuala University.
  • Mustaffa Abdullah and Dirhamsyah, M. 2002. Collaboration Production Technology in Curriculum Diploma Manufacture, Increasing Competitiveness Through Collaboration, Faculty of Industrial Engineering- Surabaya Institute of Technology, Surabaya.
  • Mohd. Hanif., Mohd. Zaki, M.J. Mohd Nor, Dirhamsyah, M. 2002. Development of Intelligent Remote Agent for Condition Monitoring, Proc. World Engineering Congress 2002, Univerisiti Putra Malaysia.
  • Mustaffa Abdullah and Dirhamsyah, M. 2002. Computation Mechanics in Diploma of Manufacture, Computation Mechanics and Numerical Analysis Seminar, Faculty of Engineering, Syiah Kuala University.
  • M.J. Mohd Nor, Che Hassan Che Haron & Dirhamsyah, M. 2000. Monitoring of Turning Operation Using Acoustic and Vibration Signals, Procs. of the International Conference on Advanced Manufacturing Technology, Faculty of Engineering, Universiti Teknologi Malaysia: 497-502.
  • M.J. Mohd Nor, Dirhamsyah, M and Valliyapan, N.D. 2000. Real-Time Monitoring of Small Drilling Operation Using Acoustic and Vibration Signals, Procs. of the International Conference on Advanced in Strategic 2000, Faculty of Engineering, Universiti Kebangsaan Malaysia: 13-22.
  • M.J. Mohd Nor & Dirhamsyah, M. 2000. Performance Monitoring of A Small Drilling Machine Using Air-Particle Acceleration Signals, Procs. of the 3rd Int. Conf. on Quality, Reliability and Maintenance, University of Oxford: 151-154.
  • M.J. Mohd Nor, Dirhamsyah, M. and Abdullah, S. 2000. Monitoring Down and Up-Cut Circular Operation on Milling Process Using Air-Particle Acceleration Signals, Submitted to Industrial and Management Engineering (TMI) Journal, Industrial Engineering, Bandung Institute of Technology.
  • M.J. Mohd Nor, Ariffin, A.K. & Dirhamsyah, M. 2000. Static and Dynamic Analysis of A Stone Crusher Design, International Seminar Numerical Analysis in Engineering 2000 (NAE 2000), Numerical Analysis Center (NAC), HEDS-JICA Project and North Sumatera University.
  • M.J. Mohd Nor, Dirhamsyah, M and Valliyapan, N.D. 2000. Condition Monitoring of Industrial Environment using Sound Signals, Seminar on Industrial and Environmental Noise Control 2000, Noise Control Research Center and Occupational Health Master Program, North Sumatera University and HEDS-JICA Project.
  • M.J. Mohd Nor & Dirhamsyah, M. 2000. Utilization of Air-Bourne Acoustic Signals for Condition Monitoring, IRPA seminar RMK-7: 572-575.
  • M.J. Mohd Nor & Dirhamsyah, M. 1999. Detection of Tool Wear in Lathe Machine Using Continous and Discrete Wavelet Transform Method, Colloquium of Dept. of Mechanical and Materials Engineering, UKM:90-95.
  • M.J. Mohd Nor & Dirhamsyah, M. 1999. Development of Machine Tool Monitoring System Using Vibration and Acoustic Signals, Proc. World Engineering Congress 99, Univerisiti Putra Malaysia: 45-49.
  • Dirhamsyah, M., Syahriza and Zahrul, F. 1998. The Prediction of Bi-Arc Surface Accuracy in End Milling Operation, Seminar Research Report of Self-Development-Project-Funding HEDS-JICA, Syiah Kuala University.
  • Dirhamsyah, M., Iqbal, M. 1998. Roundness Analysis of Boring Process at Machining Centre – 520, Seminar Research Report of Self-Development-Project-Funding HEDS-JICA, Syiah Kuala University.
  • Dirhamsyah, M. and Setiasyah, T, 1997. Integration Between Coordinate Measuring Machine and NC Milling, Procs. Seminar on CAD/CAM ‘97, Bandung Institute of Technology, Bandung, Indonesia.
  • Dirhamsyah, M. 1997. Feature Recognition 3D-Solid Block from ASC File, Mon Mata Journal, Syiah Kuala University, Indonesia, volume 25.
  • Setiasyah, T and Dirhamsyah, M. 1996. Integration Between CMM and NC Machine, International Seminar on CAD/CAM ’96, Bandung Institute of Technology and Nusantara Aircraft Industry Company.
  • Dirhamsyah, M. 1996. Blind Bore Tolerance 36H6 Set-Up Free Technology at Machining Centre, Seminar of Science and Technology 1996, North Sumatera University.
  • Dirhamsyah, M. & Setiasyah, T. 1995. Computer Aided Process Planning for Alternative Process, International Seminar on CAD/CAM ’95, Bandung Institute of Technology and Nusantara Aircraft Industry Company.
  • Setiasyah, T and Dirhamsyah, M. 1995. NC Programming for Turning and Milling Operation, Training of CNC/NC Machine Operation for Making The Precision Components, Corporation between Bandung Institute of Technology – Dept. of Trade and Industry Indonesia.